Find answers in our
FAQ
20" 1.7 to 2.2 Schrader Valve Inner Tube
20" 1.7 to 2.2 Schrader Valve Inner Tube
8311089
This inner tube is suitable for 20" diameter tyres with 1.70 to 2.20 section with a 33mm Schrader valve.
20" Schrader inner tube (large valve) for 20-inch tyres.
Color :
Size Size Guide
AUTO VALVE
Online stock
6
Delivery :
Available
- FREE Next Day Home Delivery for orders above $499
- Add $80 for Same Day Delivery
Shipping Information
Stock in stores
Pick up in-store
Service not available
Delivery
Select Your Location
FREE for orders above HKD499
Currently not available online. Click to check the stock in stores. Check stock in stores !
Stores located in Hong Kong Island
Select Your LocationOur Stores
- No stores in this area
Privacy policy
Notify me
Your request has been registered
You will receive a notification at :
Please validate the captcha
Similar Products
BTWIN
12" 1.7 to 2.2 Bent Schrader Valve Inner Tube
(1)
BTWIN
700x23/32 60 mm Presta Valve Inner Tube
(22)
BTWIN
26x1.7/2.2 Inner Tube - 48 mm Presta Valve
(12)
BTWIN
700x35/45 Inner Tube Schrader - 48mm
(40)
Similar Products
BTWIN
12" 1.7 to 2.2 Bent Schrader Valve Inner Tube
(1)
BTWIN
700x23/32 60 mm Presta Valve Inner Tube
(22)
BTWIN
26x1.7/2.2 Inner Tube - 48 mm Presta Valve
(12)
BTWIN
700x35/45 Inner Tube Schrader - 48mm
(40)
Products benefits
Compatibility
20", 1.7 to 2.2 cross section tyres ETRTO 44/57 - 406
Waterproof
Optimised composition to ensure your inner tube has a good seal.
Technical information
How to choose an inner tube
Check the information indicated on the sidewall of the tyre (diameter and width).
For example, 20 x 2.10 means that the tyre is 20 inches in diameter and 2.10 inches wide.
On the tyre sidewall you will also find the dimensions in mm in ETRTO international units. For example, 50-406 means a tyre that is 50mm wide and has an inner diameter of 406mm (approx. 20 x 2.00).
For example, 20 x 2.10 means that the tyre is 20 inches in diameter and 2.10 inches wide.
On the tyre sidewall you will also find the dimensions in mm in ETRTO international units. For example, 50-406 means a tyre that is 50mm wide and has an inner diameter of 406mm (approx. 20 x 2.00).
Removing an inner tube
Remove the old inner tube using B'Twin tyre levers
Checks to carry out before installing an inner tube
Check the condition of your tyre and replace it if necessary.
Make sure no objects are lodged in the tyre.
Check the condition of your tyre rim strip. A rim strip that is even slightly bent can cause punctures.
Check that your rim does not have any other issues that could damage your inner tube.
Make sure no objects are lodged in the tyre.
Check the condition of your tyre rim strip. A rim strip that is even slightly bent can cause punctures.
Check that your rim does not have any other issues that could damage your inner tube.
Mounting the inner tube
Watch our video before you start.
Pre-inflate the inner tube slightly to avoid pinching.
Insert the valve, making sure you are using the correct valve for your rim.
Put the inner tube entirely inside the tyre so that it fits inside the rim.
Take care not to pinch the inner tube when fitting.
Pre-inflate the inner tube slightly to avoid pinching.
Insert the valve, making sure you are using the correct valve for your rim.
Put the inner tube entirely inside the tyre so that it fits inside the rim.
Take care not to pinch the inner tube when fitting.
Mounting the tyre
Start mounting the tyre at the valve.
Finish mounting the tyre opposite the valve to avoid pinching the inner tube.
Never mount your tyre with a tool or a tyre lever, as you risk pinching and puncturing the inner tube.
Finish mounting the tyre opposite the valve to avoid pinching the inner tube.
Never mount your tyre with a tool or a tyre lever, as you risk pinching and puncturing the inner tube.
Inflating the tyre
Inflate your tyre carefully, to the pressure recommended by the manufacturer (visible on the tyre sidewall in PSI or bars, 1 bar = 14.51 PSI).
Regularly check that your tyre is in the correct position as you inflate it.
Regularly check that your tyre is in the correct position as you inflate it.
Tip from the pros
To prevent any puncture from pinching and to achieve the best performance, we recommend checking and, if necessary, pumping up your front tyre before each ride.
Weight:
148g
Warranty
2 years
Product concept & technology
Product Composition
Main fabric
90% Rubber - Isobutylene Isoprene Rubber - Butyl, 10% Brass
STORAGE ADVICE
Carry your inner tubes in a container to protect them from getting punctured (B'Twin carry case, original packaging, etc.).
TESTS
To guarantee optimal quality, 100% of our inner tubes are inflated for a period of 8 hours.
User Restrictions
Take care not to pinch the inner tube when mounting it on.