700x35/45 Inner Tube Schrader - 48mm

$24

Be the First to Write a Review

0.0/ 5 Write a Review

5

0
4

0
3

0
2

0
1

0

Product Code : 92 8311102

This inner tube is suitable for 700 diameter tyres with a 35 to 45 section with a 48mm Schrader valve.

700x35 to 700x45 inner tube for 700 (28 inch) tyres and wheels.

Questions & answers

Size Size Guide

Online Stock

Only a few units left !

Currently out of stock

Notify me when available online

Know everything about privacy policy

Click & Collect 1Hour

Home Delivery : Available

Same Day Delivery at $80
FREE Next Day Home Delivery for orders above $499

Products benefits

Compatibility

700x35 to 700x45 tyres.48mm valve.ETRTO 35/45 - 622

Waterproof

Optimised composition to ensure your inner tube has a good seal.

Technical information

How to choose your inner tube

Check the information indicated on the sidewall of the tyre (diameter and width). For example, 700x35 means that the tyre is 700mm in diameter and 35mm wide.
On the tyre sidewall you will also find the dimensions in mm in ETRTO international units.
For example, 36-622 means that the tyre is 35mm wide and has a 622mm internal diameter (or around 700x35).

Removing an inner tube

Remove the used inner tube using B'Twin tyre levers (ref 8047839).

Checks to carry out before installing an inner tube

Check the condition of your tyre and replace it if necessary.
Make sure no objects are lodged in the tyre.
Check the condition of your tyre rim strip. A rim strip that is even slightly bent can cause punctures.
Check that your rim does not have any other issues that could damage your inner tube

Mounting the inner tube

Watch our video before you start.
Pre-inflate the inner tube slightly to avoid pinching.
Insert the valve, making sure you are using the correct valve for your rim.
Put the inner tube entirely inside the tyre so that it fits inside the rim.
Take care not to pinch the inner tube when fitting.

Mounting the tyre

Start by mounting the tyre onto the wheel on the opposite side to the valve.
Finish mounting the tyre at the valve to avoid pinching the inner tube.
Never mount your tyre with a screwdriver or a tyre lever, as you risk pinching and puncturing the inner tube.

Inflating the tyre

Inflate your tyre carefully, to the pressure recommended by the manufacturer (visible on the tyre sidewall in PSI or bars, 1 bar = 14.51 PSI).
Regularly check that your tyre is in the correct position as you inflate it.

Tip from the pros

To prevent any puncture from pinching and to achieve the best performance, we recommend checking and, if necessary, pumping up your front tyre before each ride.

Weight:

165g

Complementary products

You'll need a tyre lever (reference 8047839) to change your inner tube.
If you want to repair a punctured inner tube, you can use repair patches (reference 8563156) or self-adhesive patches (reference 8562489)

Warranty

2 years

Product concept & technology

Product Composition

Main fabric : 90.0% Rubber - Isobutylene Isoprene Rubber (IIR) - Butyl, Main fabric : 10.0% Brass

STORAGE ADVICE

Carry your inner tubes in a container to protect them from getting punctured (tool drum, original packaging…).

TESTS

To guarantee optimal quality, 100% of our inner tubes are inflated for a period of 8 hours.

User Restrictions

Take care not to pinch the inner tube when mounting it on.

700x35/45 Inner Tube Schrader - 48mm