100% anti-UV. Brown lens, ideal to see well in the sun and clouds.
Anti-fog treatment on a single lens.
Field of vision
Cylindrical lens with good horizontal field of vision.
18 mm wide elastic.
1 loop lets you adjust the length of the elastic cord.
Perfect fit for Wedze helmets.
UV rays are bad for the eyes. All our goggles are 100% anti-UV certified by standard EN 174. Skiing goggles are the best protective solution: they perfectly enclose your eyes and prevent the ingress of UV rays, including glare.
Anti-fog is a treatment on just the inside of the lens.
The single lens has an anti-fog treatment to limit the formation of fogging. Warning, do not rub the inside of the screen. Carefully dab the surface to conserve the efficacy of the anti-fogging treatment for as long as possible.
Acetate lens with anti-fog treatment on the inside.
18 mm high polyamide, polyester and rubber elastic.
EN 174 standard
EN 174 is a European standard applicable to goggles used for eye protection when downhill skiing or similar activities such as snowboarding.
Moisture causes condensation. You must therefore make sure that the foam does not get soaked in water, e.g. by placing the goggles on a wet helmet or hat. Falling face down in the snow can also cause your goggles to fog up. This is why in all cases, you must dry your ski goggles properly overnight, so as to eliminate all traces of moisture and set off the next day with a completely dry product.
Size XS corresponds to a head circumference of between 47 and 52 cm.
Product concept & technology
Exclusive of elastic (Only of US) : 36.0% Rubber - Synthetic, Exclusive of elastic (Only of US) : 33.0% Polyamide, Exclusive of elastic (Only of US) : 31.0% Polyester (PES) Lens : 100.0% Cellulose Frame : 100.0% Thermoplastic polyurethane (TPU) Foam : 100.0% Polyurethane (PU)
Advice: store the mask in a Wedze case after use.
All Wedze products are tested under the real-life conditions of use for which they were designed: in the snow, cold and in all conditions found when sledging. The design teams, product managers, engineers and pattern makers check that the programme for which the product was designed and developed perfectly suits its use in the field.