1 min of recharge = 6 mins of lighting. Maximum battery life of 12 minutes
Ease of use
User-friendly handle and push-button which can be used with gloves
35 lumens in power mode
Weather resistant and shockproof in water (IPX7, i.e. 1m for 30 minutes)
Resistant to dropping and shocks thanks to its rubber head
Rechargeable with its dynamo system
The DECATHLON DYNAMO 300 WP torch has several lighting modes to cope with every situation.
- high mode (35lm), for distant lighting
- eco mode (10lm), for increased battery life
- flash mode (35lm) for attracting attention in the event of danger
The DECATHLON DYNAMO 300 WP torch has an internal battery that can be recharged with a dynamo with a charging ratio of 6:1 (1 minute of recharging = 6 minutes of lighting)
The narrow beam of the DYNAMO 300 WP torch focuses the light in order to optimise the range of the light (40 m in high mode)
Conventional LED lighting: the brightness gradually decreases as the battery charge diminishes in order to prolong battery life.
The plastic casing of the DYNAMO 300 WP torch is designed to withstand being dropped on hard ground on multiple occasions. The lens is protected by a rubber head
WEIGHT & DIMENSIONS
The DECATHLON DYNAMO 300 WP torch weighs only 135g.
Maximum diameter: 50mm
Length: 145 mm
WARRANTY AND AFTER-SALES SERVICE
The DECATHLON products have a 2-year warranty. For any questions, go to the Geonaute SUPPORT support.geonaute.com website. This is where you will find the advice on how to use your product properly: instructions, FAQs and tutorial videos. In order to provide you with the best possible support, Geonaute's support team is at your disposal 24 hours a day to answer your questions in person.
PRODUCT CONCEPT & TECHNOLOGY
To preserve the performance of your battery, remember to recharge it before storing it for a prolonged period.
At DECATHLON, our products are tested by a panel of users under the conditions for which they have been designed. These tests are carried out and managed by a team of engineers dedicated to this task. The product managers, engineers and all the teams use the results of these tests to develop and create high-tech products to satisfy our users.