CONNECTION
Works when plugged into your vehicle's 12 V cigarette lighter socket with the engine running (13.8 Volt)
. Compatible with at least 10-amp fuses.
Pressure of up to 20 PSI (1.37 bar) provided.
SECURITY WARNING
IF you forget to turn on your engine or if the cigarette lighter is not correctly connected, your pump with automatically go into alert mode and will turn itself off to avoid damage to the vehicle’s fuse.
INFLATION
1/ Connect the pump to the cigar lighter with the car engine running.
2/ Connect the hose from the pump to the boat
3/ Select the pressure unit: psi/bar
4/ Set the recommended pressure with the +/- buttons
5/ Start inflating by pressing the POWER logo
The pump stops automatically at the set pressure.
Adjustment of the target pressure from 0.1 PSI (0.01 Bar) to 20 PSI (1.37 BAR).
One inflation cycle to 0.4 PSI and then one pressure cycle to 20 PSI.
DEFLATING
1/ Connect the pump to the cigarette lighter.
2/ Connect your hose to the "DEFLATE” outlet on the pump and connect it to the valve on your boat.
3/ Select the pressure unit: psi/bar
4/ Press the (-) button until “DEFLATE" appears on the screen.
5/ Start deflating by pressing the "POWER" logo.
6/ To stop deflating, press "POWER" or wait for the end of the 120-second cycle.
DIMENSIONS
Length: 28.5cm
Width: 19 cm
Height: 9 cm
Weight: 1,6 kg
Supplied with a set of adapters
In addition to its standard adapter to inflate your dropstitch SUP or kayak to high pressure, the pump also comes with:
A "Mini Boston" adapter to inflate the kayak seats
a "Boston" adapter to inflate low-pressure kayaks, inflatable air mattresses and tents.
A nozzle adapter to inflate certain kitesurfing wings.
Warranty
Availability of spare parts essential to the use of the product: 2 years
