Recommended user weight and maximum load
Recommended user weight:
Less than 60 kg: ultra-stable board.
60 to 80 kg : ideal board for easily getting into stand-up paddleboarding on calm bodies of water.
Over 80 kg: if you are starting out, we recommend the SUP 100 COMPACT size L or the 11-foot X100 SUP
Maximum load to stay up out of the water: 220 kg.
Inflating & deflating the Stand-Up Paddle board (Version 2, ref 8736000 - Turquoise)
Inflation: The SUP is equipped with a new-generation valve to guarantee even more security.
To inflate your SUP, open the cap and connect the pump (“IN” mode).
Inflate to 15 psi for best results.
Disconnect the pump and close the outer cap.
Turn the cap a quarter clockwise (“OUT” mode).Roll, starting from the opposite side to the valve to remove all the air for tight folding.Close the cap.
Inflating & deflating the Stand-Up Paddle board (Version 1, ref 8603061 - Blue)
Inflation: Check the valve’s orange button is up (closed), by pressing on it.
Connect the pump.
Inflate to 15 psi.
The more inflated the SUP, the more stable it is and the better its movement.
Disconnect the pump and close the outer plug.
Firmly push the valve’s orange button to let the air out.
Do not put your face near and stay back.
Roll, starting from the opposite side to the valve to remove all the air.
TO GUARANTEE OPTIMAL COMPACITY FOLLOW OUR FOLDING METHOD
Completely deflate the board.Roll up the product a first time to expel the air through the open valve.Unroll the board and lay out flat. Fold it lengthways with the fin bases positioned outwards.Roll up from front to back.
Use the compression strap to keep it rolled up and help you fit it into the bag.
For more details, check out our videos online available on the product page.
Fins and fin bases
Two 118 mm fins for paddling in shallow water.
Available through customer service and online in the event of breakage or loss (8502106).
Remember to remove the fins once you get out of the water.
For your safety, protect your hand if you need to apply force to the rear of the fin to remove it in the event of blockage with sand.If possible, rinse the bases of the fins before and after using the stand-up paddleboard for easier fin installation and removal.
An 12% reduction in CO2 impact:
We have developed a drop stitch that is lighter and better suited to the shape of the board to provide the same performance with less material.
In addition, 50% of the backpack has been dope-dyed.
This process allows the thread to be dyed at the moment it is produced, rather than submerging the fabric in large dying baths. This reduces water consumption and reduces discharges of waste water and CO2.
INFLATABLE BOARD:Length: 9' (274.5 cm)
Width: 33" (84 cm)
Thickness: 5" (12.5 cm)
Volume: 232 litres
Weight: 7 kg (±10%)
Height: 50 cm
Width: 38 cm
Thickness: 19 cm
30 L (approx.) carry bag that can hold the pump and paddle on the outside.
OUR BOARDS CAN BE REPAIRED!
We have a stand-up paddleboard repair kit, reference 8512384.We recommend that you contact the workshop of your local store for all repairs.
We can repair bases of the fins, handles, valves and significant leaks
Very lightweight leash that you won't even know is there during use and is easy to store.
Always wear your leash to stay attached to your board if you fall. To avoid damaging the leash and leaving marks on your folded board, remove and rinse after each use.This leash attaches to the ankle.
PLEASE NOTE: don’t use the leash on the river.
Directions for use
Using a buoyancy aid jacket (reference 8501295) or a buoyancy aid belt (reference 8600104)
Not suitable for paddling further than 300 m from shelter.
Don’t use the leash on the river.
Notify someone of your trip and your whereabouts.
Research to find out if there are any local navigation rules that apply to the location of your trip.
COMPACT BOARD STORAGE
Store deflated, flat and out of sunlight, after first removing the fin and leash. If storing inflated, release some of the pressure and store in a flat position without any load.
Excluding transport, you don’t need its extreme compactness, preferably storing it inflated or rolled lengthways.
Availability of spare parts essential to the use of the product: 10 years