TRIBORD

JR Jacket SAILING 100 purple

NEW LOWER PRICE
$229
BEFORE : $239
Be the First to Write a Review
Ref. : 8775897

Our designers – and fellow sailors – have developed this waterproof sailing jacket for sailing in warm and stormy weather.

This waterproof and breathable sailing anorak with a high collar is lightweight and easy to adjust and will be comfortable to wear during all your sailing sessions. An ideal rain anorak

Color: light mauve / purple

  • 5-6years/3'7"-4' Out of Stock
  • 7-8years/4'-4'2" Out of Stock
  • 8-9years/4'3"-4'6 Out of Stock
  • 10-11years/4'7"-4'9" undefined
  • 12-13years/4'9"-5'2" Out of Stock
  • 14-15years/5'2"-5'7" Out of Stock

Our services :

  • FREE DELIVERY WHEN YOU BUY ANY 2 DECATHLON BRANDED PRODUCTS
  • All Decathlon products are eligible for lifetime return

Products benefits

Waterproof

Tested in moderate rain over 2 hrs 5,000 mm Schmerber Pockets not waterproof

Breathability

Very breathable coated fabric (RET < 12): reduces condensation

Pockets

2 secure pockets

Windproof

Fabric especially coated to reduce the cooling effect of the wind

Water repellent

Especially treated so water slides off the fabric surface.

Resistance to salt water

Materials and zips resistant to salt water and sea air.

Compact design

This compact jacket can be folded away into one of its pockets

Technical information

Waterproofing 1/2

We measure the resistance of a fabric to water pressure in mm of water column (based on the JIS standard). The higher the water pressure withstood by the fabric, the more waterproof it is.
Here are the waterproofing ratings:
Component resistant to water pressure of 5000 mm before and after ageing (5 washes). This equates to 5000 Schmerber - average pressure exerted by the water during rain.
The jacket's waterproofing has been tested in a rain shower with 60 litres of water / m² / hour for hours

Waterproofing 2/2

- High collar
- Injection-moulded plastic to avoid salt oxidation
- Water-repellent components (water runs off the fabric)
- 100% taped seams
- Central opening features a flap with a drainage channel for optimal waterproofing

Hood

The hood does not pack down into the collar, it is attached.
Hood is fully depth-adjustable but not in length. Due to regulations we cannot put an adjustment cord near the neck.
Visor with a headband to provide a good level of protection and a better hold.
The high neck effectively protects the neck.

Pockets

2 zip pockets on the front of the jacket for your hands or a few items
NOTE: the pockets are NOT WATERPROOF

Front zip closure

A zip on the entire jacket length with an interior flap protects against the wind and water.
Soft fabric flap on the top of the collar to protect the chin.

Fabric breathability

To find out whether a fabric is breathable, we test its evaporate resistance or RET (ISO 11092 standard). The lower the fabric's resistance, the more moisture is evaporated, and therefore the higher the fabric's breathability.
We consider that if:
RET < 9 = very breathable fabric
9 < RET < 12 = breathable fabric.
The values for the Trek 500 jacket’s breathability are as follows:
> More resistant fabric: RET < 12 (or 3621 g/m²/24 h, JIS1099A standard)
> Lightest fabric: RET < 8 (or 2972 g/m² /2

Water-repellent properties information

A fabric is water-repellent when water slides off the surface of the fabric, without seeping in.
Your jacket does not become waterlogged and remains lightweight and breathable. The water-repellent properties are achieved with a treatment applied to the external side of the fabric, but in practice these properties can be altered.
The water-repellent properties can be reactivated by putting the jacket in a dryer for 10 minutes at the lowest temperature.

How to wash your jacket?

To maintain the water repellent properties, infrequent washing is recommended.
Close all zips and flaps, empty all pockets and then turn the garment inside out to wash it. You can wash it on a synthetic cycle at 30°C or 40°C with your usual detergent. Do not use fabric conditioner, which could damage the existing performance of the garment, or bleach. Very important: choose a full-rinse cycle or extra rinse.

How to reactivate the anorak's water repellency

Drying is a crucial phase in reactivating the water repellent treatment.
We recommend that you lay your anorak flat on a clothes rack and leave it out to dry in the open. Caution: never dry your anorak directly on a radiator.
Then place it in the tumble dryer on a short synthetics cycle, i.e. 10 to 15 minutes, before turning it back the right way round. Caution: do not over-dry the garment.

Warranty

2 years

Product concept & technology

Product Composition

Upper part - Main fabric 100% Polyamide Lower part - Main fabric 100% Polyamide Main lining 100% Polyester Sleeve lining 100% Polyester Coating 100% Polyurethane

Maintenance advice

Machine wash - 30° max - normal

Do not bleach

Tumble dry - low heat

Do not iron

Do not dry-clean

User reviews

Questions & Answers