Insulation from recycled wadding, lined with brushed polyester.
Water-repellent outer fabric that does not become saturated with water.
Adjustable waist and removable straps. Belt loops.
2 hand pockets secured by a zip.
Ease of use
Pull 'n fit system for adjusting the leg length. Detachable braces.
Which of the trousers' components provide warmth?
To help keep you warm, we use recycled wadding insulation (60g/sqm²). This synthetic polyester-based wadding traps more or less air, depending on the size of its fibres, to insulate you from the cold.
What is a coating?
The coating is a waterproofing substance spread over the inside of a fabric. It prevents water from seeping into the garment but allows the water vapour produced by the body's physical activity to escape.You stay dry and more comfortable during your sporting activity.
How is the waterproofness of the your trousers measured?
We measure a fabric's resistance to a column of water expressed in mm (based on the ISO 811 standard). The higher the pressure, the more waterproof the fabric. A fabric with a waterproof rating of 3,000mm is therefore resistant to the pressure exerted by a 3,000 mm column of water (roughly equivalent to a 2-hour downpour).
How can you be sure your trousers will give you proper protection in bad weather?
These trousers have been developed using a robust component and rigorous assembly that limit wind chill and prevent the passage of water to help you brave all weather (rain, snow, wind, etc.). To check their water-resistance, the trousers were placed under a special shower, to reproduce the conditions faced by a skier. We have checked the waterproofness of this product in use in various weather conditions over several days.
What is the purpose of your trousers' water-repellent feature?
A fabric is water-repellent when it allows water to slide over its surface without it seeping in. These trousers feature water-repellent components to improve their resistance to bad weather. The fabric is made water-repellent by treating its outer surface. However, this property may deteriorate with use.
How to restore the water repellency of your trousers?
Remember that water repellency can be restored. To do this, put the trousers in the dryer on a synthetics programme for 10 to 15 minutes. You can also use a waterproof spray (sold in our stores): spray the product evenly over the entire garment, then allow to dry for 10 to 12 hours).
What are "breathable" trousers?
It's a garment that is capable of wicking away the water vapour produced by your body when exercising. To see if a fabric is breathable, we measure its resistance to evaporative heat (RET) in a standardised ISO 11092 test. The lower the RET, the more breathable the fabric. The 150 trousers have an RET of 13. However, it is the technical solutions (zips, vents, mesh) that Wedze uses that limit the condensation inside the garment and maximise breathability.
How should I dress to avoid having cold legs on the slopes?
To keep your legs warm and dry, you need 2 layers: 1 skiing base layer to wick away perspiration and 1 pair of ski trousers to protect from the weather and provide warmth.
How can you stop snow from getting into your trousers?
The trousers have elasticated gaiters at the ankles to cover the shoes. If you fall or come into contact with fresh snow, the seal created by the gaiter keeps the snow out.
What is the fit of the 150 trousers?
Regular fit with an internal volume that allows these trousers to be combined with a technical base layer.
How to wash your trousers?
To optimise the performance and durability of your trousers, we recommend: * Machine wash at 30°, synthetics programme. * Turn the product inside out. * Add a small amount of detergent. No softener. * We recommend you wring it out by hand. * Dry on a hanger in a warm, well-ventilated place. Do not dry clean. Do not place on a radiator.
Store on a hanger and do not fold, as this can damage the fabric coating. Dry thoroughly before storing in a dry and well-ventilated place.
All Wedze products are designed and developed in the Mont Blanc Valley. They are then tested under the same conditions as you would experience in real-life use (snow, cold, powder snow, etc.). The design teams make sure that the programme for which the product is designed and developed corresponds perfectly to its use in the field.