Weight: 3.1 kg.
Compression cover: 13 litres. 40 cm x 19 cm x 17 cm
3-in-1. 60 cm per person. Room height 108 cm. 2 doors, 2 porches, 4 pockets.
Easy assembly / dismantling
Free-standing. Fast to pitch: pre-assembled room and flysheet. Standard poles.
Resists 70 km/h (Force 8) winds: tested in a wind tunnel on a rotating platform.
Water column (Schmerber):
Flysheet > 2000 mm.
Groundsheet > 5000 mm.
2 mechanical air vents, mosquito nets and Fresh & Black fabric for sleeping well
Patented external Fresh & Black fabric: 99% darkness even in full daylight.
Undyed flysheet, water saving and CO2 emissions limitation.
Dimensions and weights, Folded dimensions
Total weight: 3.1 kg, i.e. 1.55 kg/person. 3-in-1 = separable elements to provide the configuration you need. Weight of flysheet on its own: 1250 g Bedroom weight only: 970 g Pole kit weight: 600 g Peg weight (12 items): 180 g or 15 g each Cover weight: 90 g Repair kit (ferrule, patch): 20 g Cover with compression straps: 13 litres. Cover dimensions: 40 cm x 19 cm x 17 cm.
Total height of the tent: 117 cm. Room dimensions: length 210 cm x width 120 cm x height 108 cm at the highest point. Two side porches (storage space between the bedroom and flysheet) 60 cm deep can each hold a backpack of around 50 to 70 litres, mountain equipment and a pair of hiking boots. 4 pockets in the bedroom. 1 inside top hook to hang a lamp and an adjustable lengthwise clothesline.
Poles and pegs
7001 aluminium tent poles; Ø 8.5 mm. 7001 aluminium top pole; Ø 9.5 mm. Lightness and strength of aluminium. Tent pegs: Length 17 cm; Ø 6.1 mm. Anodised 7075 aluminium for increased strength and low weight.
Pitching / striking
3-in-1 self-supporting tent using combined or separate elements - complete tent: bedroom and flysheet - bedroom only: dry and temperate environment. Light - flysheet only: shelter mode - tarp; protect yourself from rain and wind. Ultra-light. Rapid pitching and striking: pre-mounted and assembled flysheet and bedroom. Slide the poles into the flysheet sleeves. To store the tent in its cover, fold the poles, fold up the tent on itself and roll the whole thing up.
Quechua tents are tested in the laboratory (tent mounted under 200 litres/sqm/hour for 4 hours, the equivalent of a tropical rain storm), as well as in field test missions. 75 denier polyester (PE) flysheet, polyurethane coated (interior) water-repellent treatment (exterior), PE 75D bedroom floor cover. Seams sealed with thermo-bonded strips. Bedroom in breathable and water-repellent PE 66D and part-mosquito net, to avoid contact with drops of condensation.
We test all our tents in a wind tunnel on a turntable to expose each side of the tent to the wind. To guarantee its wind resistance, the tent must be properly pitched, taut but not excessively so, with all the guy ropes well deployed around the tent. In this way, it will remain habitable with a wind speed measured at 70 km/h near the ground.
Ventilation and condensation reduction
Bedroom with mosquito net sections for ventilation and water-repellent fabric sections to protect from condensation and draughts. Large vent at the front of the tent’s flysheet and ventilation at the bottom. To limit condensation inside your tent, it must be correctly pitched, the canvas stretched out, but not excessively so. The use of ventilation and good air circulation limits humidity inside your tent.
Titanium dioxide (Ti0²)-coated flysheet fabric guarantees UPF protection of 50+. Please note: a large amount of UV rays can pass through an open door. Protect your skin.
Warranty & after-sales service
As designers and users who love our natural playground, we care about the durability of our products, which is why all our tents are designed to be repairable. You will find spare parts (tent pole repairs, etc.) on the shelves or at the workshop of your local Decathlon store, on the website or at the following address: http://spi-atelier.decathlon.fr/atelier/produit/1966778 In case of a problem, get your tent examined in your local Decathlon store.
2 years. All our tents are repairable. Parts and information in store or on the website.
3.1kg in size Unique size
Product concept & technology
Main fabric : 100.0% Polyester (PES) Pole : 100.0% Aluminium Carry bag : 100.0% Polyester (PES)
Storage: after use or cleaning, store the tent only once perfectly dry to prevent any odour or mould from developing.
The waterproofing of Quechua tents is validated, tent mounted, under 200 litres of water/sqm/hr (tropical rain) for 4 hours excluding any water passage through the seams, flaps, openings, zips, etc. The water column test (= mm Schmerbers) measures the impermeability of the fabric. Wind resistance: tents pitched in a wind tunnel on a rotating table to expose each side of the tent to the wind. We also carry out numerous field tests in real conditions.