ITIWIT

X100+ INFLATABLE HIGH-PRESSURE DROPSTITCH FLOOR 3-PERSON TOURING KAYAK

$4,499
Ref. : 8486041

Our team of enthusiasts has developed this kayak for beginners to tour with 2 or 3 people, in calm waters, from 2 to 3 hours

A sturdy inflatable canoe-kayak with high-pressure Dropstitch floor and 3 raised adult seats for good paddling comfort. A good compromise between stability and performance.

Home delivery
Currently not available online

Check stock in-store

Our services :

  • FREE DELIVERY WHEN YOU BUY ANY 2 DECATHLON BRANDED PRODUCTS
  • All Decathlon products are eligible for lifetime return

Products benefits

Volume

For 2 to 3 people, up to a maximum of 245 kg (540 lbs).

Easy assembly / dismantling

Inflates in 10 minutes with a dual action hand pump.

Stability

Side tubes and a wide inflatable floor for good stability.

Glide performance

The bow shape gives the kayak good glide performance. 3 keels.

Sitting comfort

Raised seat for comfort when at rest and when paddling.

Robustness

Dropstitch floor. Tarpaulin side tubes with pressure relief valves

Pictures

X100+ INFLATABLE HIGH-PRESSURE DROPSTITCH FLOOR 3-PERSON TOURING KAYAK
X100+ INFLATABLE HIGH-PRESSURE DROPSTITCH FLOOR 3-PERSON TOURING KAYAK
X100+ INFLATABLE HIGH-PRESSURE DROPSTITCH FLOOR 3-PERSON TOURING KAYAK

Technical information

Technical data and weight.

INFLATED SIZE
Length: 410 cm
Width: 102 cm

FOLDED & BAGGED SIZE
Height: 72 cm
Width: 45 cm
Thickness: 37 cm

Weight: 18 kg
Maximum floor pressure: 0.34 bar (5 psi)
Side tube and seat pressure: 0.2 bar (3 psi)

Number of seats: 2 or 3 seats

Content: kayak, bag, spare material, 3 fins, user guide, inflation connector, strap.

PUMP NOT INCLUDED
For use with an Itiwit double-action hand pump with adapters

Inflation tips and floor positioning

Connect the ITIWIT pump (sold separately) by twisting the pump adapter 1/4 turn and inflate the floor to 5 psi. Finish by screwing the cap back on.
Put the floor inside the kayak and strap it at the ends. The floor valve must be aligned with the side tube valves located at the back of the kayak. The floor's position must allow free access to the drain plugs located in the middle of the kayak.

Side tube and seat inflation tips

Connect the ITIWIT pump (sold separately) by twisting the pump adapter 1/4 turn and inflate the side tubes to 3 psi. Finish by screwing the cap back on. Each side tube has a pressure relief valve. Its purpose is to evacuate excess air resulting from over-inflation. When this happens, you may notice a hissing sound. This hissing is normal, it can happen during inflation or after prolonged exposure to sun. It will stop once the kayak reaches the correct internal pressure

Seat comfort and positioning.

The seats are high, providing increased comfort for adults in the paddling position.
Position the seats on the floor using the velcro areas located under the seat and on the floor.
Stow any bags or equipment into the kayak's rear hatch or attach to the rear deck.
The boat is ready to be launched.

Glide performance

Thanks to the stiffness of the Dropstitch floor

Maintenance advice

Remove the seats and slightly deflate the floor to make it easier to rinse out.
Rinse the kayak, bottom and seats with clean water after each use to avoid damage from sand, salt water and sun.
Open the drain plugs located in the middle of the kayak and at the rear. Tip the kayak to empty out the water.

Disassembly & folding

Make sure that the surface you intend to fold the kayak on is clean.
Remove the fins.
Deflate the side bladders. The valves are located at the back of the kayak. WARNING: Do not unscrew the pressure relief valves at the front.
Fold the floor.
Fold the rest of the kayak in half lengthwise. Flatten the front fin base.
Lay the rolled floor on the front end. Roll the kayak to the rear end.
Strap the kayak.

Storage

Once dry and clean, the kayak should be stored in a dry and shady place, protected from significant temperature changes.
The kayak can be stored folded but if you have enough space, storing it flat and slightly inflated will extend its life.

After-sales service

Spare parts are available for ITIWIT kayaks from after-sales service. Visit the workshop at your nearest Decathlon store to order.

Drop Stitch floor: 8561072
Pressure relief valve: 8561069
Carry bag: 8605095
Paddle rip-tab strap: 8561070

Directions for use.

We recommend that you practise with a buoyancy vest.

Warranty

Availability of spare parts essential to the use of the product: 10 years

More About Product

Itiwit 3-person Kayak 100+

A few words from the product manager

When we were designing this 3-person inflatable kayak, we wanted to make the experience of kayaking with others even better. We carefully chose the materials: dropstitch for its rigidity and glide performance, and tarpaulin for its durability and quick drying.
We also made this 3-person kayak compact and easy to carry: it fits into a backpack with reinforced straps. Now you can enjoy touring with family and friends

Diego, kayak product manager

Itiwit 3-person Kayak 100+

Inflatable, removable and adjustable seats

Itiwit 3-person Kayak 100+
Itiwit 3-person Kayak 100+
Itiwit 3-person Kayak 100+

Glide performance

Itiwit 3-person Kayak 100+
Itiwit 3-person Kayak 100+
Itiwit 3-person Kayak 100+

The ideal kayak to use with family and friends

Video

Product concept & technology

Product Composition

Bladder 60% Polyvinyl Chloride, 40% Polyester Floor mat 70% Polyvinyl Chloride, 30% Polyester

STOCK ADVICE

Once dry and clean, the kayak should be stored in a dry and shady place, protected from significant temperature changes.

User Restrictions

Paddling up to 300 metres from shelter.

Approved By

ISO 6185-1 standard. Category IIIB (beach craft)
Complies with French Division 240 regulations (sailing up to 300 m from shelter)

Maintenance advice

Rinse in clean water after use. Dry after each usage..

Manual

To have more informations about this product, consult the notice

User reviews

Questions & Answers