Flat camber/rocker camber to combine traction and tolerance.
Small bend radius providing good traction on slopes.
Ease of handling
Twin Tip (symmetric) shape to move in both directions.
A word from the product manager
During snowboard lessons, very quickly (sometimes even at the end of the first week of classes), instructors teach children to slide back to be immediately at home in both directions. Based on this observation, we have designed this board with Twin Tip shape (symmetrical at the front and back). These boards are also the most versatile because they also go very well on the track and at the edges of the track.
The board grows with your child
Children grown, on average, 6 cm per year. The ideal is to keep your board for at least 2 years and then pass it to the little brother / sister. We put 2 x 6 inserts for the screws of the snowboard bindings, that is to say that for each binding there are 2 possible positions. Screwing the bindings: _ in year 1, on the 4 inserts closest to the center of the board, _ in year 2, on the 4 inserts furthest from the center of the board.
Front width 245mm/Center 216mm / Rear 245mm Radius 5.0m Effective edge 742mm Number of inserts: 2 x 6 (2 possible positions per binding/40 mm between each) Recommended stance: 350 mm
When to wax your snowboard?
Wed'ze planks come out of the factory waxed. They then require regular maintenance like all snowboards and skis: ideally, waxing every 5 outlets and at least once a year, - either at the beginning of the season to start with a very good glide, - or at the end of the season by allowing the wax to protect the sole during all summer.
Sliding quality: extruded sole
The soles are made of polyethylene but according to 2 different technical processes: - extruded soleplate, with a certain density of polyethylene - sintered soleplate, with a greater density of polyethylene (fewer holes, more PE) An extruded soleplate provides a normal glide and good resistance in time. A frosted sole is the Rolls Royce of soles. The slide is really fantastic.
Dry edges at the end of the day to prevent rust. Ideally, wax every 5 outings. Storing for the summer: keep away from sunlight, you can leave your bindings on the board.
This product is designed for snowboarding. For any other use, you risk to exceed the technical capacities of this product. We strongly recommend wearing a helmet, a back protector and protective shorts to fully appreciate your practice.