5.9 m² living room with an inner tent height of 1.95 m.
This tent has several features:
- A foldaway basin-shape groundsheet at the entrance in case of rain
- Shuttered mosquito nets windows
- Storage pockets in the bedrooms and living room
Pitching and dismantling
Inflatable all-in-one structure with pre-assembled bedrooms and flysheet.
Using our Quechua 5.2 litre red pump with built-in pressure gauge, we recommend that you inflate the tubes to 7 PSI of pressure.
To see this pump, copy the reference 8243066 and paste it into the search engine of our website.
Our Fresh&Black technology relies on a UPF 50+ sun protection fabric.
Caution: be careful, a significant amount of UV can get in through a simple open door.
The ventilated flysheet on the living room lets you ventilate and limit condensation inside your tent. Outside each bedroom is a high ventilation hatch. Inside each bedroom is a large, low ventilation hatch. The living room is fitted with a mosquito net and the bedrooms with high mosquito nets.
We test all our tents in a wind tunnel on a turntable. The aim is to expose each side of our tent to the same wind intensity.
Properly pitched with the guy ropes pegged in, this tent remains habitable with a wind of force 7, measured at 60 km/h.
We test our tents to validate their waterproofing. The first test is done in the laboratory, 4 hours under 200 litres of water per hour per m², the equivalent of 200 mm tropical rain per hour. The second test is done in the field under real-life conditions by our teams. This tent is fitted with a 2,000 mm polyurethane-coated polyester flysheet. It also has seams taped using heat-sealed strips and a 190 g/m² polyethylene groundsheet.
As designers and users who love our natural playground, we care about the durability of our products. That's why all our tents are designed to be repairable. Spare parts and inflatable pole repairs are available from your Decathlon store workshop or on our website.
Poles and tent pegs
Inflatable poles - All our inflatable poles have a two-layer arch structure: a thermoplastic polyurethane (TPU) air chamber and a 600-denier polyester cover*.
Living room reinforcement - An aluminium bar in the living room to stiffen the structure.
Tent pegs - All our pegs are made of steel and are 6 mm in diameter.
*600 denier indicates a weight of 600 g for 9 m in length.
Sleeping area width
Each bedroom in this tent is intended to accommodate a maximum of two 70-cm wide mattresses.